Thank you for choosing Positz Bicycle Spokes to maintain the structural integrity of your bicycle wheel. This installation guide will provide you with step-by-step instructions on how to properly install Positz Bicycle Spokes for a secure and reliable wheel build. Let’s get started!

Note: Spoke installation requires specialized knowledge and tools. If you are not confident in your ability to install spokes correctly, we recommend seeking assistance from a professional bicycle mechanic.

Step 1: Preparing for Installation

  1. Ensure you have the appropriate Positz Bicycle Spokes for your specific wheel. Spokes come in various lengths and gauges, so be sure to select the correct size for your wheel and hub.
  2. Familiarize yourself with the spokes and their components. Each spoke typically consists of a threaded end, a head, and a body.

Step 2: Removing Damaged Spokes (If applicable)

  1. If you are replacing damaged or broken spokes, start by removing the old spokes from the wheel.
  2. Using a spoke wrench, loosen the spoke nipples on the rim until the spoke can be completely removed.
  3. Carefully remove the damaged spoke from the hub and rim, taking note of its position and orientation.

Step 3: Installing New Spokes

  1. Start by inserting the threaded end of a Positz Bicycle Spoke into a spoke hole on the hub, aligning it with the corresponding hole on the rim.
  2. Thread the spoke through the spoke hole in the rim, ensuring it passes through the correct pattern of spokes.
  3. Repeat the process for each spoke, following the specific spoke pattern required for your wheel.
  4. As you install each spoke, lightly thread the nipple onto the spoke thread, but do not tighten it fully at this stage. Leave some room for adjustment during wheel truing.

Step 4: Spoke Tensioning and Wheel Truing

  1. Once all the spokes are installed, begin the process of tensioning and truing the wheel. This step requires a spoke tension gauge and a truing stand or similar wheel truing tool.
  2. Gradually tighten each spoke nipple in small increments, working your way around the wheel in a systematic pattern.
  3. Use the spoke tension gauge to ensure consistent tension across all spokes. Aim for the recommended tension specified by your wheel manufacturer or a professional bike mechanic.
  4. While tensioning the spokes, continually check the wheel’s trueness by observing the lateral (side-to-side) and radial (up-and-down) alignment. Adjust spoke tension as necessary to correct any deviations.

Step 5: Finalizing the Installation

  1. Once the wheel is properly tensioned and trued, double-check the spoke tension and make any necessary adjustments to achieve the desired specifications.
  2. Apply a small amount of spoke thread lock or spoke prep compound to the spoke threads to help prevent them from loosening over time.
  3. Spin the wheel and listen for any unusual noises or signs of spoke movement. If you notice any issues, revisit the truing process and make further adjustments as needed.

Congratulations! You have successfully installed Positz Bicycle Spokes onto your bicycle wheel. Remember to periodically inspect your spokes for any signs of damage or fatigue and replace them if necessary.

If you have any questions or require further assistance, please don’t hesitate to contact Positz customer support. Enjoy your smooth and reliable rides with Positz Bicycle Spokes!