Thank you for choosing Positz Road Bike Pedals with Toe Clip and Strap to enhance your cycling experience. This installation guide will provide you with step-by-step instructions on how to properly install and adjust the Positz Road Bike Pedals with pre-installed Toe Clip and Strap system on your road bike. Let’s get started!

Step 1: Preparing for Installation

  1. Ensure you have a pair of Positz Road Bike Pedals with Toe Clip and Strap.
  2. Familiarize yourself with the components, including the pedals, toe clips, straps, and attachment hardware.

Step 2: Removing Existing Pedals (if applicable)

  1. Use a compatible 15mm wrench or pedal wrench to loosen and remove the existing pedals from your road bike.
  2. Note that the left pedal has a reverse thread, so you need to turn it clockwise to loosen and remove it.

Step 3: Installing Positz Road Bike Pedals

  1. Identify the left and right pedals. The “L” or “R” markings on the pedal axles indicate their respective sides.
  2. Apply a small amount of grease to the pedal threads to ensure smooth installation.
  3. Align the threads of the left pedal with the left crank arm and start threading it in by hand.
  4. Use a compatible 15mm wrench or pedal wrench to tighten the left pedal securely.
  5. Repeat the process for the right pedal, aligning the threads with the right crank arm and tightening it securely.

Step 4: Attaching and Adjusting the Toe Straps

  1. Position your cycling shoes inside the toe clips and thread the straps through the slots.
  2. Adjust the length of each strap to fit the circumference of your cycling shoe comfortably.
  3. Pass the end of each strap through the buckle, creating a loop that can be easily tightened and released.
  4. Ensure the straps are tight enough to keep your feet secure during pedaling but loose enough for easy entry and exit.

Step 5: Adjusting Strap Tension

  1. Place your feet in the cycling shoes and fasten the straps securely.
  2. Adjust the strap tension to a level that provides a snug fit without causing discomfort or restricting blood circulation.
  3. Ensure the straps are tight enough to keep your feet secure during pedalling.

Step 6: Verifying Installation

  1. Mount your road bike and engage your feet into the toe clips and straps.
  2. Practice pedalling motions and check for any uncomfortable pressure points or slippage.
  3. If necessary, make minor adjustments to the strap tension to optimize your pedalling efficiency and comfort.

Congratulations! You have successfully installed and adjusted the Positz Road Bike Pedals with Toe Clip and Strap system on your road bike. Enjoy the added power transfer and stability during your rides!

If you have any questions or require further assistance, please don’t hesitate to contact Positz customer support. Happy cycling with Positz Road Bike Pedals, Toe Clips, and Straps!