Thank you for choosing Positz Compact Watts Front and Rear Bike Lights to enhance your cycling safety. This installation guide will assist you in properly installing and setting up your Positz Compact Watts lights for optimal performance. Let’s get started!

Step 1: Front Light Installation

  1. Choose a suitable mounting location on the front of your bicycle’s handlebars. Ideally, position the light in a central location for maximum visibility.
  2. Wrap the included silicone strap around the handlebars and secure it in place by looping it through the front light’s mounting bracket.
  3. Adjust the strap to ensure a snug and secure fit. Make sure the front light is facing forward and the beam angle is suitable for illuminating the road ahead.
  4. Double-check the front light’s attachment to ensure it is firmly secured and will not move during rides.

Step 2: Rear Light Installation

  1. Select an appropriate mounting position for the rear light on the seatpost or rear seat stay of your bicycle.
  2. Wrap the included silicone strap around the selected mounting location and thread it through the rear light’s mounting bracket.
  3. Adjust the strap to achieve a secure and stable attachment. Ensure the rear light is facing backward to provide visibility to approaching vehicles and other cyclists.
  4. Confirm that the rear light is securely attached and will not shift or rotate during rides.

Step 3: Light Operation and Charging

  1. Locate the power button or switch on each light. Press and hold the button to turn on the lights. They should illuminate to indicate they are functioning properly.
  2. Check for different light modes or settings, such as steady beam, flashing, or varying brightness levels. Toggle through the modes by pressing the power button to choose your desired lighting option.
  3. To charge the rear light, use the included USB charging cable. Connect the cable to a power source, such as a computer or USB wall adapter, and plug the other end into the charging port on the lights. To charge the front light connect it directly to a USB port. The lights will indicate when they are charging.

Step 4: Post-Installation Check

  1. Confirm that both the front and rear lights are securely attached to your bicycle and do not obstruct any other components or cables.
  2. Test the lights once again to ensure they are functioning correctly in the chosen lighting mode.
  3. Verify that the lights provide adequate visibility to enhance your safety while cycling.

Congratulations! You have successfully installed and set up your Positz Compact Watts Front and Rear Bike Lights. Remember to periodically recharge the lights using the provided USB cable to maintain optimal brightness and performance. Enjoy your rides with increased safety and visibility!